Jumpsuit with two metal zippers, locking in up and down directions with flap cap or plastic zipper. Two locking in up and down directions with flap cover with width not less than 7 mm when locking.
Two pockets on the chest with flap buttons + two side pockets + two back pockets + Tool pocket on the right side.
Sleeves with a bracelet or buttons.
Chest opening with buttons at the neck of the overalls and at the end of the zipper.
Fabric used is soft, soft-touch and treated against crunching and shrinkage.
The dye is a permanent type.
The quality of the fabric for the interior pockets is the same as the fabric from which the jumpsuit is made of.
The length of the side pocket from the inside is not less than 13 cm from the bottom of the pocket opening.
The average tensile strength of knitting is not less than 30 kg.
Over lock Knitting is made on all sides of the Jumpsuit fabric.
Jumpsuit is provided with elastic strip on the waist.
Supports are made on top of each other at the beginnings and ends of the pockets, and supporting between legs area and all stress areas.
Dimensions exceeded by 5%, up or 2% by decrease, with prior approval.
Each Jumpsuit has a ticket showing the company name, size, and washing conditions.
Jumpsuit shall be provided with light reflectors (width of not less than 2.5 cm) in the areas of the chest, the back and the leg.
